Engineering skills & trades
-
How to Make Carpentry Tools
Aaron Moore, Musaemura Sithole
Squares, gauges, clamps and planes are among the tools whose construction is described in detail in this book, along with useful guidance on the maintenance and repair of woodworking tools. These low-cost tools are suitable for use in large training institutions or small workshops and are designed t...
-
Carpentry Toolmaking
This guide for carpentry instructors includes detailed plans for practical demonstrations, and important theoretical aspects of the craft. The tools include planes, clamps, workbench and vice. There is also a section on basic blacksmithing techniques.
-
How to Make a Foot-Operated Workshop Drill
Describes how to build a drilling machine appropriate for rural workshops, and gives full assembly instructions. The machine, which is a vertical drill for use with either metal or wood, can drill holes up to 12mm in diameter in 12mm steel plates.
-
How to Make a Hand-Operated Hole-Punch
Describes the process of building a machine for punching holes in sheet metal, with full dimensions and instructions. Designed for construction from readily available steel sections, this machine can be built by most workshops or blacksmiths.
-
How to Make a Pipe-Bending Machine
Articles such as hospital and school equipment - bed frames, chairs, tables, handrails - all require the bending of pipe. This manual gives full instructions on how to make a pipe-bending machine, which could be made by most workshops or blacksmiths.
-
How to Make a Treadle-Operated Wood-Turning Lathe
This machine would be a useful addition to any woodwork shop, enabling new products to be made without the use of electricity. It could be the basis for a village industry, and can be built by most small metal workshops and blacksmiths.
-
How to Make Twelve Woodworking Tools
Step-by-step instructions on how to make a: Try square, Bevel square, Marking gauge , Cutting gauge, Mortise gauge, Panel gauge, Mallet, Bow drill, Bow saw, Coping saw, Fret saw and Hack saw.
-
How to Make a Folding Machine for Sheet Metal Work
Gives full details on how to build and use a versatile machine for working sheet metal
-
How to Make Cutting Shears for Sheet Metal
This manual, which gives full dimensions, describes the making of a machine which would be basic equipment for any workshop producing items in sheet metal, items such as water troughs, fuel tanks, stove pipes, vehicles, and agricultural equipment.
-
Lost-wax Casting
Outlines the basic techniques of lost-wax casting and describes the equipment needed to carry out the process successfully. Explains how the equipment can be made, using local labour and natural resources readily available in developing countries.